-
MORE CATEGORIES
-
-
-
-
-
-
-
-
-
-
-
EXTERIOR POOL MATERIALS AND RECREATION
-
-
-
-
-
-
-
-
-
-
REVIGLASS COLLECTIONS
-
-
-
REVIGLASS COLLECTIONS
-
-
-
-
-
-
-
-
-
REMOVABLE SWIMMING POOL ACCESSORIES
-
-
-
-
-
-
-
-
OFFERS
-
-
FILTRATION
-
- POOL CLEANERS
-
SPARE PARTS
-
-
BRANDS
-
-
REPAIR
-
Bluek electric pool cleaner
€330.00
|
Tax included
500351AZ
Mini Bluek Electric Pool Cleaner, especially light and very easy to handle, recommended for pools up to 8 meters long and with a flat bottom or with a slope of no more than 15º.
Mini Bluek Electric Pool Cleaner
- Floor cleaning only.
- Filtration at 180 microns.
- Cable length: 15 meters.
- Filtration flow 18 m3/h. Speed 15 mt/min.
- 2 work cycles of 1.5h and 2.5h.
- 1 engine.
- Maximum cleaning area 180m2.
- Ideal for small pools with a flat bottom.
- PVC brushes.
- Warranty 2 years.
- It does not have a remote control, nor a car.
Recommendations
- For optimal operation, water - temperature, pH, and chlorine levels should conform to the levels listed below: (If any of these levels are different than the levels presented in the instructions for the user, please adhere to one of the levels listed here)
Temperature: 10°- 34° C (43°-93° F)
PH Level: 7.0 - 7.4
Physical Level Chlorine: Max 4-5 ppm. - Make the equipment work in flat-floor pools.
- To prevent possible damage to the cleaner, do not start the appliance when it is out of the water.
- Only connect the power cord to an earthed outlet.
- Do not operate the robot when the pool is being used.
- Do not attempt to move the floats along the power cord. Always keep in its original position.
- Before starting up the appliance, check that the cable is correctly stretched, without any tangling, so that it does not affect the operation of the cleaner.
- For optimum performance of the cleaner, check before each use that the filter bag is clean.
- Store the cleaner in a cool and ventilated place, away from direct sunlight.
- Place the power supply unit in a shaded area to avoid overheating and potential damage to components. Do not cover the unit.
- The cleaner must only be handled by authorized after-sales service personnel. In the event of intervention on it by unauthorized personnel, the guarantee will be invalidated.
- In order to avoid any accident/damage, the power supply control box has to be placed at a minimum distance of 3.5 meters from the edge of the pool.
Remember that at GRUPOPOOLPLUS we are specialists in pool products and that in addition to what we offer you here you can visit other products such as:
500351AZ
Spare parts for this product
Más Automatic Electronic Pool Cleaners (Robots) que podrían interesarte
