Hydrospin Hydrocyclonic Prefilter

Save 50% on water when washing your filter Hydrocyclonic pre-cleaning filter that can be installed in filtration systems in both new and existing installations. It allows to treat flows of up to 30m³/h with a maximum working pressure of 2.5 bar. It is installed between the pump and the filter, separating solids up to 40 microns in such a way that the consumption of washing water from the filtration system is reduced by half. The HydroSpin has a solids collection tank with 3 different zones (decantation, clarification and thickening). It can be cleaned with only 5 liters of water without having to stop the pump. · Considerable reduction of filter washing operations. · Low pressure losses that allow it to be installed without the need to change the existing pump. · It can be installed on the ground with the supplied accessories or on the wall using DN300 flanges. · Standard Ø63mm connections for water inlet and outlet and Ø32mm for dirt evacuation. To install it on the wall, you must previously purchase the Kit code 47158