Hydrospin Hydrocyclonic Prefilter

Save 50% on water when washing your filter Hydrocyclonic cleaning pre-filter that can be installed in filtration systems in both new and existing installations. It allows to treat flows of up to 30m³/h with a maximum working pressure of 2.5 bar. It is installed between the pump and the filter, separating solids up to 40 microns in a way that reduces the consumption of washing water by the filtration system by half. The HydroSpin has a solids collection tank with 3 different zones (settlement, clarification and thickening). It can be cleaned with only 5 liters of water without having to stop the pump. · Considerable reduction of filter washing operations. · Low pressure drops that allow it to be installed without the need to change the existing pump. · It can be installed on the floor with the supplied accessories or on the wall using DN300 flanges. · Standard connections Ø63mm for water inlet and outlet and Ø32mm for evacuation of dirt. To install it on the wall, you must previously purchase the Kit code 47158