Zodiac Vortex OV 5300 SW PRO 4WD pool cleaner The Zodiac Vortex OV...
Flat LED Projector 18 W
Flat spotlight made of plastic material.
Low consumption LED.
100% security in waterproofing thanks to the Epoxy sealing.
Installation in concrete.
Supplied with 2.5 meters of cable.
SMD2835 type LED.
Voltage: AC 12V / 50-60 Hz.
1. This spotlight is powered by 12V AC. It must be connected to the transformer, never directly to the electrical network.
2. The junction box must be located at least 1.2m from the edge of the pool.
3. The installation plate must be placed in such a way that the top of the spotlight is at least 450mm below the water level of the pool.
4. The focus must always be placed on flat surfaces. Screw the fixing plate with the four screws.
5. If the interconnection of the cables is made below the water level, this connection must be made with a spotlight connection and/or epoxy glue. Otherwise moisture could enter the bulb through the cable.
6. Connect the cables with their corresponding ones in the connection box and fill with epoxy glue.
7. To test the lamp for more than ten seconds, it must be completely immersed in water.