Electrodo célula Zodiac Ei Opciones-R0758800 10 g/h (antigua ref. W197601)
This is a cookie agreement request — you can customize it or disable in the backoffice: Modules / Module manager / AN Cookie Popup.
Espa Silen Plus Variable Speed Pump: Variable speed pump for swimming pools that automatically adapts its frequency to each work cycle.
Sand filter ESPA Filterkit Plus: Sand filter with valve made of modified polypropylene resistant to chemical and atmospheric agents. Injected, with the two halves joined by thermal welding.
Sand Filter Espa Filterkit Plus
Espa Filterkit Plus sand filter Great versatility, with 6-way valves in Top or Lateral position. Maximum quality, from Ø 520 to 760 mm for pools with a water volume up to 176 m3.
Model: FKP5206L 10 M3 / h for pools up to 80 M3
Model: FKP6206LT 15 M3 / h for pools up to 120 M3
Model: FKP7606LT 22 M3 / h for pools up to 176 M3
Characteristics of Sand Filter by Espa Filterkit Plus:
2.5 bar operating pressure; maximum pressure 3.5 bar.
Connection with 1½ ”6-way valve for Ø 520 and 620 mm models; 2 ”for Ø 760 mm models.
Equipped with pressure gauge and air purge.
Double drain in the lower part of the filter: 1½ ”for total emptying of the filter; 1/2 ”for emptying the water without loss of sand.
Transparent cover to facilitate inspection of the Espa filter in Lateral version.
Union of valve / cover (according to Top / Side version) to the Espa filter by means of anti-blocking threaded closure Ø 203 mm.
Espa Silen Plus Variable Speed Pump
Energy savings (up to 84% in electricity costs) and water consumption (up to 58%).
Ultra-quiet operation and efficiency of operation.
Easy installation and simplified management with App via smartphone, which allows to control and program the pump.
Self-priming up to 4 m.
Available in 3 single-phase models from 1 CV to 3 CV.
5-year warranty (2 + 2 + 1 registering the product on the ESPA website).
Pump body, pump foot, diffuser, impeller and seal support in technopolymer.
AISI 431 stainless steel motor shaft.
Special mechanical seal in AISI 316.
Aluminum motor housing.
Gaskets in NBR.
Bearings up to 160 ° C.
Asynchronous, two poles.
IP 55 protection.
Class F insulation.
Supplied with suction and discharge fittings.