Electrodo célula Zodiac Ei Opciones-R0758800 10 g/h (antigua ref. W197601)
This is a cookie agreement request — you can customize it or disable in the backoffice: Modules / Module manager / AN Cookie Popup.
Espa's Silen Nox centrifugal pump is a single-stage pump for recirculation and filtration of water. Recirculation and filtration of water for medium-sized residential swimming pools. Silent Self-priming up to 4m. Pool, whirlpool and spa.
Characteristics Bomba Silen Nox Espa
This model replaces the Espa Silen model. Both models share the dimensions, so they are interchangeable.
Type of current: single phase.
Manufactured by ESPA.
Self-priming (4 meters)
Recirculation and filtration of water in small and medium pools.
Compatible with chlorinated water.
Compatible with salt water (up to 7 grams / liter).
Silen Nox Pump Materials
Pump body, impeller, diffuser, suction and discharge in technopolymer. Pump shaft in AISI 431. Mechanical seal in alumina-graphite. Aluminum motor housing. Gaskets in NBR / EPDM. Equipment. 2m cable with type F plug. Joints included 50mm.
2m cable with type F plug. Joints included 50mm.
Asynchronous 2 poles. IPX5 protection. Class F insulation. Single-phase version with built-in thermal protection. Continuous service.
Maximum water temperature: 40 ° C.
Checks prior to start-up
After making the connections defined in the previous section, unscrew the relevant filter cover and fill the pump pre-filter with water to the lower level of the suction tube. NEVER RUN THE PUMP DRY.
Open all gate valves and power up the engine. Allow a reasonable time for the tubing to self-prime. Check the absorbed current and properly adjust the thermal relay.
Pool Nox Pump Maintenance
Swimming pool pumps do not require any specific maintenance, but it is recommended to periodically clean the pump filter, emptying the pump body during periods of low temperatures through the drain plug.