Zodiac Vortex OV 5300 SW PRO 4WD pool cleaner The Zodiac Vortex OV...
Silen Nox Espa Pump 75/100/150
Espa's Silen Nox centrifugal pump is a single-stage pump for recirculation and filtration of water. Recirculation and filtration of water for medium-sized residential swimming pools. Silent Self-priming up to 4m. Pool, whirlpool and spa.
Characteristics Pump Silen Nox Espa
This model replaces the Espa Silen model. Both models share the same dimensions, so they are interchangeable.
- Type of current: single-phase.
- Manufactured by ESPA.
- Completely silent.
- Self-priming (4 meters)
- Recirculation and filtration of water in small and medium pools..
- Compatible with chlorinated water.
- Compatible with salt water (up to 7 grams/litre).
Silen Nox pump materials
Pump body, impeller, diffuser, suction and discharge in technopolymer. Pump shaft in AISI 431. Mechanical seal in alumina-graphite. Aluminum motor housing. Gaskets in NBR/EPDM. Equipment. 2m cable with F-type plug. Unions included 50mm.
2m of cable with plug type F. Unions included 50mm.
Asynchronous 2 poles. IPX5 protection. Class F insulation. Single-phase version with built-in thermal protection. Continuous service.
Maximum water temperature: 40° C.
Checks prior to start-up
Once the connections defined in the previous section have been made, unscrew the pertinent filter cover and fill the pump pre-filter with water up to the lower level of the suction tube. NEVER RUN THE PUMP DRY.
Open all gate valves and apply power to the motor. Wait a reasonable amount of time for the pipe to self-prime. Check the absorbed current and properly adjust the thermal relay.
Pool Nox Pump Maintenance
Swimming pool pumps do not require any specific maintenance, but it is recommended to periodically clean the pump filter, empty the pump body during periods of low temperatures through the drain plug.
Más Pumps que podrían interesarte
- On sale!